ARTESIA®An Italian story

Workshop

Finishes

Stones

Get Inspired

ARTESIA®Workshop

The peculiarity of naturally split slate has a timeless charm. Our range has different finishes with this feature, calibrated or no, treated with anti-stain products and protective wax or natural. But today, through research with new textures and continuous experimentation, we can offer our customers a list of 15 finishes from which to choose, even mixed. Both faces of the stone are processed to obtain a finished product ready to lay.
Most of the processing is still carried out by hand according to the most antique craftsmanship tradition.

ARTESIA®Finishes

Stone

The upper surface is natural cleft. The back can be smoothed or natural cleft according to the stone. The thickness has high tolerance (9-14 mm) and can vary according to the technical characteristics of each stone. The dimensions can have a tolerance of 3-5 mm. The edges are sawn. The slabs are packed in crates which contain about 35 m2 or in boxes for small quantities.

Easy

The upper surface is natural cleft. The under surface is rectified so as to ensure that the thickness of each tile is constant on average. The thickness has a minimum tolerance (9-12 mm) and can vary according to the technical characteristics of each stone. The sizes can have a tolerance of 2-3 mm. The edges are sawn. Each tile is perfectly clean. The tiles are packed in cardboard boxes containing about 1 m2. Specific products for natural stones are advised for laying. For treating and maintaining the material after laying we recommend using Artesia products.

Easy Plus

A product line with a natural cleft upper surface.The upper surface is natural cleft. The under-surface is rectified so as to ensure that the thickness of each tile is constant on average. The thickness has a minimum tolerance (9-12 mm) and can vary according to the technical characteristics of each stone. The sizes can have a tolerance of 2-3 mm. The edges are sawn. Each tile is perfectly clean and treated with a water and oil repellent anti-stain product and protective wax. The tiles are packed in cardboard boxes containing about 1 m2. Specific products for natural stones are advised for laying. For treating and maintaining the material after laying we recommend using Artesia products.

Classic

A product line with a natural cleft upper surface.This is a slate module with all the characteristics of the calibrated modules. The upper surface is natural cleft. The under surface is rectified so as to ensure that the thickness of each tile is constant on average. The thickness has a minimum tolerance (9-12 mm) and can vary according to the technical characteristics of each stone. The sizes are calibrated and the edges are chamfered allowing them to be laid without joints. Each tile is perfectly clean and treated with a water and oil repellent anti-stain product and protective wax. The tiles are packed in cardboard boxes containing about 1 m2. Specific products for natural stones are advised for laying.For treating and maintaining the material after laying we recommend using Artesia products.

Luxury

This product offers the high quality of a honed floor without giving up the beauty of natural stone. This is a module in slate with all the characteristics of the calibrated modules. The upper surface is honed. The under-surface is rectified so as to ensure that the thickness of each tile is constant on average. The thickness is constant, the sizes are calibrated and the edges are chamfered allowing them to be laid without joints. Each tile is perfectly clean. The tiles are packed in cardboard boxes containing about 1 m2.
Specific products for natural stones are advised for laying. For treating and maintaining the material after laying we recommend using Artesia products.

Soft

This is a slate module with all the characteristics of the calibrated modules. The upper surface is worked with a special low-intensity mechanical process which allows the structure of the natural cleft to be maintained but eliminates the more evident roughness. The under-surface is rectified so as to ensure that the thickness of each tile is constant on average. The thickness has a minimum tolerance (9-12 mm) and can vary according to the technical characteristics of each stone. The sizes are calibrated and the edges are softened allowing them to be laid without joints. Each tile is perfectly clean. The tiles are packed in cardboard boxes containing about 1 m2. Specific products for natural stones are advised for laying. For treating and maintaining the material after laying we recommend using Artesia products.

Atelier

The under surface is rectified so as to ensure that the thickness of each tile is constant on average.
The thickness has a minimum tolerance (9-12 mm) and can vary according to the technical characteristics of each stone. The upper surface presents a combination of finishings (Soft, Materic, Concrete and Textile). Each tile is perfectly clean. The tiles are packed in cardboard boxes containing about 1 m2. Specific products for natural stones are advised for laying.
For treating and maintaining the material after laying we recommend using Artesia products.

Concrete

Finish in which the exposed face is processed with a special abrasive brush which makes the surface look like concrete: rough, opaque and dimpled uniformly and with a fine grain, non-slip but always pleasant to the touch as it is not too rough. The laying face is calibrated and rectified. Smooth frame measuring 1 cm on the stone perimeter available on request. Anti-stain treatment and protective wax on request. Packaged in cardboard boxes of about 1 m2.

Materic

Finish in which the exposed face is carved by mechanically moving a special tool which hammers the stone and makes the surface uniformly textured with a grain of medium size, non-slip but always pleasant to the touch as there are no sharp edges and the surface is not too rough. The laying face is calibrated and rectified. Smooth frame measuring 1 cm on the stone perimeter available on request. Anti-stain treatment and protective wax on request. Packaged in cardboard boxes of about 1 m2.

Textile

Finish in which the exposed face is processed with a special abrasive brush that results in a lined and brushed surface, soft to the touch, similar to an unfinished fabric. Pleasant to the touch and totally devoid of rough edges. The laying face is calibrated and rectified.
Anti-stain treatment and protective wax on request. Packaged in cardboard boxes of about 1 m2.

Rain

Finish in which the visible face is processed with a special tool moved mechanically which digs the stone and creates small waves on the surface which are soft to touch providing an elegant geometric movement which is repeated. The laying face is calibrated and the tile is ground. Finish only suitable for walls. Treatment with anti-stain product and protective wax on demand. Packed in cardboard boxes of approximately 1 m2.

Skin

Finish in which the visible face is processed with a special tool moved mechanically which scratches the stone and creates small lines on the surface which are rough to touch reminding us of the bark of a tree. The laying face is calibrated and the tile is ground. Finish only suitable for walls. Treatment with anti-stain product and protective wax on demand. Packed in cardboard boxes of approximately 1 m2.

Flamed

Finish in which the visible face is flamed creating stripes on the surface which are always different and original. The laying face is calibrated and the tile is ground. Finish suitable for floor and walls. Treatment with anti-stain product and protective wax on demand. Packed in cardboard boxes of approximately 1 m2.

Split

Finish in which the tile is split mechanically re-creating the natural split. This procedure gives the visible surface a coarse and irregular appearance. The laying face is not calibrated. Finish only suitable for walls. Packed in cardboard boxes of approximately 1 m2.

Studio

Studio is the combination of two finishes: Soft and Rain.Collection I Neutri.

Be inspired & design

Utilizzando il sito, accetti l'utilizzo dei cookie da parte nostra. maggiori informazioni

Questo sito utilizza i cookie per fornire la migliore esperienza di navigazione possibile. Continuando a utilizzare questo sito senza modificare le impostazioni dei cookie o cliccando su "Accetta" permetti il loro utilizzo.

Chiudi